|
Product Detail :
|
Case No. 27/25/S/3 Under the purview of the local body, in Ward No. 25, small construction works, maintenance, repair patchwork, and material supply work.--cement Concrete Grade M10 (nominal Mix) with 40 Mm Maximum Size of Stone Aggregate, Providing and Laying in Position Cement Concrete of Specified Grade Excluding the Cost of Centering and Shuttering All Work Up to Plinth Level., Foundations, Footings, Bases of Columns, Etc. for Mass Concrete-""centering and Shuttering Including Strutting, Propping Stretching Etc. Complete for and Removal of Form Work By Sheet Plate Or Ply Wood Shuttering for *, Cement Concrete Grade M-20 (nominal Mix) with 20 Mm Maximum Size of Stone Aggregate, Providing and Laying in Position Cement Concrete of Specified Grade Excluding the Cost of Centering and Shuttering All Work Up to Plinth Level., Providing and Laying Cement Concrete Grade M-20 (nominal Mix 11.53) with 20 Mm Graded Crushed Stone Aggregate, Mixing Shall Be in Mechanical Mixer, Laying with Paver Compacting By Use of Pin, Plate/ Screed Vibrators Including Form Work By Strong Steel Girders Fixed By Spikes, Separation Membrane 125 Micron Thick, I/c Cutting of Joints @ 4 to 5 M Interval & Filling It with Hot Applied Bituminous Sealant (without Dowel Bars) (max. Thickness 20cm)", Thermo-mechanically Treated Bars. (fe 500 D Or More)."-reinforcement for R.c.c. Work Including Straightening, Cutting, Bending, Placing in Position and Binding Upto Floor Level Including Cost of Binding Wire, Wastage and Over Laps Upto 12mm Horizontal/ Inclined Position of Reinforcement Bars in Slab and Beams, Plinth, Chajjas, Lintels. Upto 4.5m Vertical Length of Reinforcement in Wall Columns (over Laps Shall Be Provided as Per Requirement of is 13920; is 456 & Sp 34) Etc. Complete.*, Construction of Granular Sub-base By Providing Coarse Graded Material (cbr-30), Spreading in Uniform Layers with Motor Grader on Prepared Surface, Mixing By Mix in Place Method, at Omc and Compacting with Vibratory Roller of 80-100 Kn Static Weight to Achieve the Desired Density. Complete in All Respect as Per Relevant Clauses of Section-400.", Structural Steel Work Riveted, Bolted Or Welded in Built Up Sections, Trusses and Framed Work, Including Cutting, Hoisting, Fixing in Position and Applying a Priming Coat of Approved Steel Primer All Complete.", Two Or More Coats on New Work.-"distempering with 1st Quality Acrylic Distemper (ready Mixed) of Approved Manufacturer, of Required Shade and Colour Complete, as Per Manufacturer's Specification.", 300 Mm Dia-"providing, Laying and Jointing Non-pressure (np4) Rcc Socket & Spigot Pipes with Rubber Gasket Joint Including Testing of Joints.", 450 Mm Dia-"providing, Laying and Jointing Non-pressure (np4) Rcc Socket & Spigot Pipes with Rubber Gasket Joint Including Testing of Joints.", 600 Mm Dia-"providing, Laying and Jointing Non-pressure (np4) Rcc Socket & Spigot Pipes with Rubber Gasket Joint Including Testing of Joints."
|
| Tender Detail : |
W-27 MAINTINANCE AND SUPPLY WORK #*. W-27 MAINTINANCE AND SUPPLY WORK |