Product Detail :
|
Scrapping the old plastered Internal Surface with sand paper and coating the entire Surface with mixture of whiting or glue and linseed oil including scaffolding etc. complete as directed Providing and applying Two coats of wall care Putty on plastered Surface and Ceiling and Walls to prepare Surface even and smooth of approved make, etc complete. Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel Work and wood Work in Buildings, including scaffolding if necessary, cleaning and preparing the Surface (excluding primer coat) etc. Complete. Disposal of surplus excavated earth including loading and unloading beyond initial lead of 50 mtr upto 2 kms lead by mecanical means. Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. Providing and fixing screw down 15 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete Providing and fixing 100 mm dia. chromium plated brass showers rose to 15mm dia. Supply pipe including necessary bend and socket complete. Manualy clearing by removeing the chockes from Nahni Trap, Gully Trap, Wash basin unit, Sink and WC with the help of required tools for proper functioning the same etc. Complete. Providing and fixing standard size(600 X450) white glazed ceramic wash basin with inlet and outlet pipes and brackets etc. Complete Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and Finishing with French Polish etc. Complete. Providing and Fixing 30 MM thick BOTH SIDE PRELAMINATED SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of M.S tubes of 19 guage thickness and, size 19 x 19 mm for styles and 15 x15 mm for the top and bottom rails, M.S frame shall have a coat of metel primer of approved make and manufacture. M.S frame shall be covered with heat mouled PVC 'C' channel made from 5 mm (+/0.25) thick prelaminated sheet of density 600 Kilogram/cbm ,of size 30mm thickness 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45? angle on either side forming stiles ; and 5 mm thick ,95 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered in 45 on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered on both sides to form lock rail.Top,bottom and lock rail shall be provided either side of the panel. An additional 5 mm (+/0.25) thick PVC strip of 20 mm width is to be stuck on the bottom side of the ' c ' channel prelaminated paneling of 5 mm (+/0.25) thick PVC sheet to be fitted inside the M.S. frame welded/ sealed to the styles and rails with 5 mm (+/0.25) x 30 mm PVC sheet beading on either side and joined together with solvent cement adhesive etc ,10 mm thickness (5 mm (+/0.25) x 2 nos ) 20 mm wide cross PVC sheet as gap insert for the rail and bottom rail. Door to be fixed to frames with 3 nos M.S.powder coated but hinges of size 100 mm x 25MM x 2mm using 32 mm long steel. Replacement of damaged Aldrop 300 mm Iron Oxidised of approved quality and make to door shutter including removing Existing the same in original position making proper adjustment for smooth Operation etc. complete as per sample approved by Engineer in-charge. Replacement of damaged Tower Bolt 300 mm Chromium plated of approved quality and make to door/window shutter including removing Existing the same in original position making proper adjustment for smooth Operation etc. complete as per sample approved by Engineer in charge. Replacement of damaged Alluminium Handle 125 mm of approved quality and make to door/window shutter including removing Existing the same in original position making proper adjustment for smooth Operation etc. complete as per sample approved by Engineer in-charge. Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing Existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. Complete. Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered Surfaces including scaffolding if necessary, preparing the Surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. Complete. Providing and applying washable oil-bound distemper of approved colour and shade to and new Surfaces in two coats including scaffolding,preparing the Surfaces.(excluding the primer coat.) etc. Complete. Providing and
|